E-KATALOGLAR
RAL K7 Classic
Teknik Şartnameler
E-KATALOGLAR
RAL K7 Classic
Teknik Şartnameler

POWERSILK PS

DEFINITION

It is a dirt-resistant, nano-particle, acrylic copolymer based, semi bright, UV resistant long-life exterior insulation coating paint with specific chemical and physical properties, waterproof special silicone content.

USAGE AREAS

It is used as an insulation coating paint which can be applied to old / new concrete, plaster, block brick, gas concrete, betopan, osb, mdf and various types of mineral surfaces on the exteriors of buildings.

PRODUCT SPECIFICATIONS

Type

TS EN 1062-1

Colour

White (RAL)

Outllook

Matt

Thinner

Can be thinned with water

Density

1,37 g/cm³

Waste

0,200 kg/m2 Change according to surface condition.

Package

5 kg - 20 kg

Application Methods

Brush, Roller, Air Gun, Airless Gun

Shelf Life

1 year

Drying Time

12 hours/25 °C

Equipment Cleaning

Clean with water.

SURFACE PREPARATION

The floor to be applied must be cleaned from oil, dirt, rust, dust and all kinds of residues. These affects product performance positively that The surface to be applied is strong and durable, attention must be paid to the completion of the set time of the new plastered surfaces, the product is applied as a primer coat with 30% dilution on surfaces with high suction power and in hot weather applications

APPLICATION CONDITIONS

After the primed surfaces have been waited for 2-4 hours at 25°C, it can be applied directly or by diluting 5-10% on request. The product is used as primer by diluting 10% for the 1st layer on surfaces that Powertex PM textured exterior wall insulation coating is made. It is applied directly on the other floors without diluting the product. Waiting at least 6 hours between coats is important for product performance. In this way, the application will help to form a durable wall without losing its qualities for many years. During and after application, the surface should be protected from adverse weather conditions such as rain, fullness, snow, for 48 hours. Full drying time after applying the product is 12 hours at 50% relative humidity and 25°C.